Pro*C/C++ Precompiler Programmer's Guide
Release 8.1.5

A68022-01

Library

Product

Contents

Index

Prev Next

10
Precompiler Options

This chapter tells you how to run the Pro*C/C++ precompiler, and describes the extensive set of precompiler options in detail.

Topics are:

The Precompiler Command

To run the Pro*C/C++ precompiler, you issue the following command:

proc <option>=<value>... 

The location of the precompiler differs from system to system. The system or database administrator usually defines logicals or aliases, or uses other system-specific means to make the Pro*C/C++ executable accessible.

Note: The option value is always separated from the option name by an equals sign, with no whitespace around the equals sign.

For example, the command

proc INAME=test_proc

precompiles the file test_proc.pc in the current directory, since the precompiler assumes that the filename extension is pc. The INAME=argument specifies the source file to be precompiled. The INAME option does not have to be the first option on the command line, but if it is, you can omit the option specification. So, the command

proc myfile 

is equivalent to

proc INAME=myfile 

Note: The option names, and option values that do not name specific OS objects, such as filenames, are not case-sensitive. In the examples in this guide, option names are written in upper case, and option values are usually in lower case. When you enter filenames, including the name of the Pro*C/C++ precompiler executable itself, always follow the case conventions used by your operating system.

Some platforms, such as UNIX, require an "escape characters" before certain characters in value strings. Consult your platform-specific documentation.

Case Sensitivity

In general, you can use either uppercase or lowercase for precompiler option names and values. However, if your operating system is case sensitive, like UNIX, you must specify filename values, including the name of the Pro*C/C++ executable, using the correct combination of upper and lowercase letters.

Precompiler Options

Precompiler options enable you to control how resources are used, how errors are reported, how input and output are formatted, and how cursors are managed.

The value of an option is a literal, which represents text or numeric values. For example, for the option

...  INAME=my_test 

the value is a string literal that specifies a filename.

For the option MAXOPENCURSORS

...MAXOPENCURSORS=20 

the value is numeric.

Some options take Boolean values, and you can represent these with the strings yes or no, true or false, or with the integer literals 1 or 0 respectively. For example, the option

...  SELECT_ERROR=yes 

is equivalent to

...  SELECT_ERROR=true

or

...  SELECT_ERROR=1 

all of which mean that SELECT errors should be flagged at run time.

Precedence of Option Values

The value of an option is determined, in increasing precedence, by:

For example, the option MAXOPENCURSORS specifies the maximum number of cached open cursors. The built-in precompiler default value for this option is 10. However, if MAXOPENCURSORS=32 is specified in the system configuration file, the default now becomes 32. The user configuration file could set it to yet another value, which then overrides the system configuration value. If this option is set on the command line, the new command-line value takes precedence over the precompiler default, the system configuration file specification, and the user configuration file specification.

Finally, an inline specification takes precedence over all preceding defaults. See the section "Configuration Files" for more information about configuration files.

Some options, such as USERID, do not have a precompiler default value. The built-in default values for options that do have them are listed in Table 10-2, and in "Using the Precompiler Options".

Attention: Check your system-specific documentation for the precompiler default values; they may have been changed from the values in this chapter for your platform.

Determining Current Values

You can interactively determine the current value for one or more options by using a question mark on the command line. For example, if you issue the command

proc ? 

the complete set of options, along with their current values, is printed to your terminal. (On a UNIX system running the C shell, escape the '?' with a backslash.) In this case, the values are those built into the precompiler, overridden by any values in the system configuration file. But if you issue the command

proc config=my_config_file.h ?
 

and there is a file named my_config_file.h in the current directory, all options are listed. Values in the user configuration file supply missing values, and supersede values built-in to the Pro*C/C++ precompiler, or values specified in the system configuration file.

Note that a configuration file must have only one option per line. Any other options entered after the first are ignored.

You can also determine the current value of a single option, by simply specifying that option name, followed by =?. For example:

proc maxopencursors=? 

prints the current default value for the MAXOPENCURSORS option.

Entering:

proc

will give a short summary which resembles Table 10-2, "Precompiler Options".

Macro and Micro Options

The options DBMS and MODE control several options at once. They are known as macro options. Some newer options such as CLOSE_ON_COMMIT, DYNAMIC and TYPE_CODE control only one function and are known as micro options. Macro options have precedence over micro options only if the macro option is at a higher level of precedence as listed in "Precedence of Option Values".

The following table lists the values of micro options set by the macro option values:

Table 10-1 How Macro Option Values Set Micro Option Values
Macro Option  Micro Option 

MODE=ANSI | ISO  

CLOSE_ON_COMMIT=YES

DYNAMIC=ANSI

TYPE_CODE=ANSI  

MODE=ORACLE  

CLOSE_ON_COMMIT=NO

END_OF_FETCH=1403

DYNAMIC=ORACLE

TYPE_CODE=ORACLE  

DBMS=NATIVE | V7 | V8  

UNSAFE_NULL=NO  

If you specify both MODE=ANSI and CLOSE_ON_COMMIT=NO in the user configuration file, then cursors will not be closed after a COMMIT. If you specify MODE=ORACLE in your configuration file and CLOSE_ON_COMMIT=YES on the command line, then the cursors will be closed.

Configuration Files

A configuration file is a text file that contains precompiler options. Each record (line) in the file contains only one option, with its associated value or values. Any options entered on a line after the first option are ignored. A configuration file can contain the lines

FIPS=YES 
MODE=ANSI 
CODE=ANSI_C

to set defaults for the FIPS, MODE, and CODE options.

There is a single system configuration file for each installation. The name of the system configuration file is pcscfg.cfg. The location of the file is system specific.

Each Pro*C/C++ user can have one or more private configuration files. The name of the configuration file must be specified using the CONFIG= precompiler option. See "Using the Precompiler Options".

Note: You cannot nest configuration files. This means that CONFIG= is not a valid option inside a configuration file.

What Occurs during Precompilation?

During precompilation, Pro*C/C++ generates C or C++ code that replaces the SQL statements embedded in your host program. The generated code contains data structures that indicate the datatype, length, and address of host variables, as well as other information required by the runtime library, SQLLIB. The generated code also contains the calls to SQLLIB routines that perform the embedded SQL operations.

Note: The precompiler does not generate calls to Oracle Call Interface (OCI) routines.

The precompiler can issue warnings and error messages. These messages are described in the Oracle8 Error Messages manual.

Table 10-2 is a quick reference to the major precompiler options. It summarizes the section "Using the Precompiler Options". The options that are accepted, but do not have any affect, are not included in this table.

Scope of Options

A precompilation unit is a file containing C code and one or more embedded SQL statements. The options specified for a given precompilation unit affect only that unit; they have no effect on other units. For example, if you specify HOLD_CURSOR=YES and RELEASE_CURSOR=YES for unit A, but not for unit B, SQL statements in unit A run with these HOLD_CURSOR and RELEASE_CURSOR values, but SQL statements in unit B run with the default values.

Quick Reference

Table 10-2 is a quick reference to the Pro*C/C++ options. Options marked with an asterisk can be entered inline.

Table 10-2 Precompiler Options
Syntax  Default  Specifics 

AUTO_CONNECT={YES | NO}  

NO  

Automatic OPS$ account  

CHAR_MAP={VARCHAR2 | CHARZ | STRING | CHARF} *  

CHARZ  

Mapping of character arrays and strings  

CLOSE_ON_COMMIT={YES | NO}  

NO  

Close all cursors on COMMIT  

CODE={ANSI_C | KR_C | CPP}  

KR_C  

Kind of C code generated  

COMP_CHARSET={MULTI_BYTE | SINGLE_BYTE}  

MULTI_BYTE  

The character set type the C/C++ compiler supports  

CONFIG=filename  

none  

User's private configuration file  

CPP_SUFFIX=extension  

none  

Specify the default filename extension for output files  

DBMS={V7 | NATIVE | V8}  

NATIVE  

Compatibility (Oracle7, Oracle8i, or the database version to which you are connected at precompile time)  

DEF_SQLCODE={YES | NO}  

NO  

Generate a macro to #define SQLCODE  

DEFINE=name *  

none  

Define a name for use by the Pro*C/C++ precompiler  

DURATION={TRANSACTION | SESSION}  

TRANSACTION  

Set pin duration for objects in the cache  

DYNAMIC={ANSI | ORACLE}  

ORACLE  

Specifies Oracle or ANSI SQL semantics.  

ERRORS={YES | NO}  

YES  

Where to direct error messages (NO means only to listing file, and not to terminal)  

ERRTYPE=filename  

none  

Name of the listing file for intype file error messages  

FIPS={NO | SQL89 | SQL2 | YES} *  

none  

Whether to flag ANSI/ISO non-compliance  

HEADER=extension  

none  

Specify file extension for precompiled header files.  

HOLD_CURSOR={YES | NO} *  

NO  

How cursor cache handles SQL statement  

[INAME=]filename  

none  

Name of the input file  

INCLUDE=pathname *  

none  

Directory path for EXEC SQL INCLUDE or #include statements  

INTYPE=filename  

none  

Name of the input file for type information  

LINES={YES | NO}  

NO  

Whether #line directives are generated  

LNAME=filename  

none  

Name of listing file  

LTYPE={NONE | SHORT | LONG}  

none  

Type of listing file to be generated, if any  

MAXLITERAL=10..1024  

1024  

Maximum length (bytes) of string literals in generated C code  

MAXOPENCURSORS=5..255 *  

10  

Maximum number of concurrent cached open cursors  

MODE={ANSI | ISO | ORACLE}  

ORACLE  

ANSI/ISO or Oracle behavior  

NLS_CHAR=(var1, ..., varn)  

none  

Specify NLS character variables  

NLS_LOCAL={YES | NO}  

NO  

Control NLS character semantics  

OBJECTS={YES | NO}  

YES  

Support object types  

[ONAME=]filename  

iname.c  

Name of the output (code) file  

ORACA={YES | NO} *  

NO  

Whether to use the ORACA  

PAGELEN=30..256  

80  

Page length of the listing file  

PARSE={NONE | PARTIAL | FULL}  

FULL  

Whether Pro*C/C++ parses (with a C parser) the.pc source.  

PREFETCH=0..65535  

1  

Speed up queries by pre-fetching a given number of rows.  

RELEASE_CURSOR={YES | NO} *  

NO  

Control release of cursors from cursor cache  

SELECT_ERROR={YES | NO} *  

YES  

Flagging of SELECT errors  

SQLCHECK={SEMANTICS | SYNTAX} *  

SYNTAX  

Amount of precompile time SQL checking  

SYS_INCLUDE=pathname  

none  

Directory where system header files, such as iostream.h, are found  

THREADS={YES | NO}  

NO  

Indicates a multi-threaded application  

TYPE_CODE={ORACLE | ANSI}  

ORACLE  

Use of Oracle or ANSI type codes for dynamic SQL  

UNSAFE_NULL={YES | NO}  

NO  

UNSAFE_NULL=YES disables the ORA-01405 message  

USERID=username/password[@dbname]  

none  

Username/password[@dbname] connect string  

VARCHAR={YES | NO}  

NO  

Allow the use of implicit VARCHAR structures  

VERSION={ANY | LATEST | RECENT} *  

RECENT  

Which version of an object is to be returned  

Entering Options

You can enter any precompiler option in the command line. Many can also be entered inline in the precompiler program source file, using the EXEC ORACLE OPTION statement.

On the Command Line

You enter precompiler options in the command line using the following syntax:

... [OPTION_NAME=value] [OPTION_NAME=value] ... 

Separate each option=value specification with one or more spaces. For example, you might enter the following:

... CODE=ANSI_C MODE=ANSI 

Inline

You enter options inline by coding EXEC ORACLE statements, using the following syntax:

EXEC ORACLE OPTION (OPTION_NAME=value); 

For example, you might code the following:

EXEC ORACLE OPTION (RELEASE_CURSOR=yes); 

Uses for EXEC ORACLE

The EXEC ORACLE feature is especially useful for changing option values during precompilation. For example, you might want to change HOLD_CURSOR and RELEASE_CURSOR on a statement-by-statement basis. Appendix C, "Performance Tuning" shows you how to optimize runtime performance using inline options.

Specifying options inline or in a configuration file is also helpful if your operating system limits the number of characters you can enter on the command line.

Scope of EXEC ORACLE

An EXEC ORACLE statement stays in effect until textually superseded by another EXEC ORACLE statement specifying the same option. In the following example, HOLD_CURSOR=NO stays in effect until superseded by HOLD_CURSOR=YES:

char emp_name[20]; 
int  emp_number, dept_number; 
float salary; 
 
EXEC SQL WHENEVER NOT FOUND DO break; 
EXEC ORACLE OPTION (HOLD_CURSOR=NO); 
 
EXEC SQL DECLARE emp_cursor CURSOR FOR 
SELECT empno, deptno FROM emp; 
 
EXEC SQL OPEN emp_cursor; 
printf( 
"Employee Number  Department\n--------------------------\n"); 
for (;;) 
{ 
   EXEC SQL FETCH emp_cursor INTO :emp_number, :dept_number; 
   printf("%d\t%d\n", emp_number, dept_number); 
} 
 
EXEC SQL WHENEVER NOT FOUND CONTINUE; 
for (;;) 
{ 
   printf("Employee number: "); 
   scanf("%d", &emp_number); 
   if (emp_number == 0) 
      break; 
   EXEC ORACLE OPTION (HOLD_CURSOR=YES); 
   EXEC SQL SELECT ename, sal 
      INTO :emp_name, :salary 
      FROM emp WHERE empno = :emp_number; 
   printf("Salary for %s is %6.2f.\n", emp_name, salary); 

Using the Precompiler Options

This section is organized for easy reference. It lists the precompiler options alphabetically, and for each option gives its purpose, syntax, and default value. Usage notes that help you understand how the option works are also provided.

AUTO_CONNECT

Purpose

Allows automatic connection to the OPS$ account.

Syntax

AUTO_CONNECT={YES | NO}

Default

NO

Usage Notes

Can be entered only on the command line or in a configuration file.

If AUTO_CONNECT=YES, and the application is not already connected to a database when it processes the first executable SQL statement, it attempts to connect using the userid

OPS$<username>

where username is your current operating system user or task name and OPS$username is a valid Oracle userid.

When AUTO_CONNECT=NO, you must use the CONNECT statement in your program to connect to Oracle.

CHAR_MAP

Purpose

Specifies the default mapping of C host variables of type char or char[n], and pointers to them, into SQL.

Syntax

CHAR_MAP={VARCHAR2 | CHARZ | STRING | CHARF}

Default

CHARZ

Usage Note

Before release 8.0, you had to declare char or char[n] host variables as CHAR, using the SQL DECLARE statement. The external datatypes VARCHAR2 and CHARZ were the default character mappings of Oracle7.

See "National Language Support" for a table of CHAR_MAP settings, descriptions of the datatype, and where they are the default. An example of usage of CHAR_MAP in Pro*C/C++ is found in "Inline Usage of the CHAR_MAP Option".

CLOSE_ON_COMMIT

Purpose

Specifies whether or not to close all cursors on a commit statement.

Syntax

CLOSE_ON_COMMIT={YES | NO}

Default

NO

Usage Notes

Can be used only on the command line or in a configuration file.

If MODE is specified at a higher level than CLOSE_ON_COMMIT, then MODE takes precedence. For example, the defaults are MODE=ORACLE and CLOSE_ON_COMMIT=NO. If the user specifies MODE=ANSI on the command line, then any cursors will be closed on commit.

Issuing a COMMIT or ROLLBACK closes all explicit cursors. (When MODE=ORACLE, a commit or rollback closes only cursors referenced in a CURRENT OF clause.)

More information can be found in "The CLOSE_ON_COMMIT Precompiler Option". For a further discussion of the precedence of this option see "Macro and Micro Options" .

CODE

Purpose

Specifies the format of C function prototypes generated by the Pro*C/C++ precompiler. (A function prototype declares a function and the datatypes of its arguments.) The precompiler generates function prototypes for SQL library routines, so that your C compiler can resolve external references. The CODE option lets you control the prototyping.

Syntax

CODE={ANSI_C | KR_C | CPP}

Default

KR_C

Usage Notes

Can be entered on the command line, but not inline.

ANSI C standard X3.159-1989 provides for function prototyping. When CODE=ANSI_C, Pro*C/C++ generates full function prototypes, which conform to the ANSI C standard. An example follows:

extern void sqlora(long *, void *); 

The precompiler can also generate other ANSI-approved constructs such as the const type qualifier.

When CODE=KR_C (the default), the precompiler comments out the argument lists of generated function prototypes, as shown here:

extern void sqlora(/*_ long *, void * _*/); 

Specify CODE=KR_C if your C compiler is not compliant with the X3.159 standard.

When CODE=CPP, the precompiler generates C++ compatible code. See "Code Generation" for all of the consequences of using this option value.

COMP_CHARSET

Purpose

Indicates to the Pro*C/C++ Precompiler whether multi-byte character sets are (or are not) supported by the compiler to be used. It is intended for use by developers working in a multi-byte client-side environment (for example, when NLS_LANG is set to a multi-byte character set).

Syntax

COMP_CHARSET={MULTI_BYTE | SINGLE_BYTE}

Default

MULTI_BYTE

Usage Notes

Can be entered only on the command line.

With COMP_CHARSET=MULTI_BYTE (default), Pro*C/C++ generates C code that is to be compiled by a compiler that supports multi-byte NLS character sets.

With COMP_CHARSET=SINGLE_BYTE, Pro*C/C++ generates C code for single-byte compilers that addresses a complication that may arise from the ASCII equivalent of a backslash (\) character in the second byte of a double-byte character in a multi-byte string. In this case, the backslash (\) character is "escaped" with another backslash character preceding it.

Note: The need for this feature is common when developing in a Shift-JIS environment with older C compilers.

This option has no effect when NLS_LANG is set to a single-byte character set.

CONFIG

Purpose

Specifies the name of a user configuration file.

Syntax

CONFIG=filename

Default

None

Usage Notes

Can be entered only on the command line.

This option is the only way you can inform Pro*C/C++ of the name and location of user configuration files.

CPP_SUFFIX

Purpose

The CPP_SUFFIX option allows you to specify the filename extension that the precompiler appends to the C++ output file generated when the CODE=CPP option is specified.

Syntax

CPP_SUFFIX=filename_extension

Default

System-specific.

Usage Notes

Most C compilers expect a default extension of ".c" for their input files. Different C++ compilers, however, can expect different filename extensions. The CPP_SUFFIX option allows you to specify the filename extension that the precompiler generates. The value of this option is a string, without the quotes or the period. For example, CPP_SUFFIX=cc, or CPP_SUFFIX=C.

DBMS

Purpose

Specifies whether Oracle follows the semantic and syntactic rules of Oracle8i, Oracle7, or the native version of Oracle (that is, the version to which the application is connected).

Syntax

DBMS={NATIVE | V7 | V8}

Default

NATIVE

Usage Notes

Can be entered only on the command line, or in a configuration file.

The DBMS option lets you control the version-specific behavior of Oracle. When DBMS=NATIVE (the default), Oracle follows the semantic and syntactic rules of the database version to which the application is connected.

When DBMS=V8, or DBMS=V7, Oracle follows the respective rules for Oracle8i (which remain the same as for Oracle7).

V6_CHAR is not supported in Oracle8i and its functionality is provided by the precompiler option CHAR_MAP (see "CHAR_MAP").

Table 10-3 How DBMS and MODE Interact
Situation   DBMS=V7 | V8 MODE=ANSI   DBMS=V7 | V8 MODE=ORACLE  

"no data found" warning code  

+100  

+1403  

fetch NULLs without using indicator variables  

error -1405  

error -1405  

fetch truncated values without using indicator variables  

no error but SQLWARN(2) is set  

no error but SQLWARN(2) is set  

cursors closed by COMMIT or ROLLBACK  

all explicit  

CURRENT OF only  

open an already OPENed cursor  

error -2117  

no error  

close an already CLOSEd cursor  

error -2114  

no error  

SQL group function ignores NULLs  

no warning  

no warning  

when SQL group function in multirow query is called  

FETCH time  

FETCH time  

declare SQLCA structure  

optional  

required  

declare SQLCODE or SQLSTATE status variable  

required  

optional, but Oracle ignores  

integrity constraints  

enabled  

enabled  

PCTINCREASE for rollback segments  

not allowed  

not allowed  

MAXEXTENTS storage parameters  

not allowed  

not allowed  

DEF_SQLCODE

Purpose

Controls whether the Pro*C/C++ precompiler generates #define's for SQLCODE.

Syntax

DEF_SQLCODE={NO | YES}

Default

NO

Usage Notes

Can be used only on the command line or in a configuration file.

When DEF_SQLCODE=YES, the precompiler defines SQLCODE in the generated source code as follows:

#define SQLCODE sqlca.sqlcode

You can then use SQLCODE to check the results of executable SQL statement. The DEF_SQLCODE option is supplied for compliance with standards that require the use of SQLCODE.

In addition, you must also include the SQLCA using one of the following entries in your source code:

#include <sqlca.h>

or

EXEC SQL INCLUDE SQLCA;

If the SQLCA is not included, using this option causes a precompile time error.

DEFINE

Purpose

Defines a name that can be used in #ifdef and #ifndef Pro*C/C++ precompiler directives. The defined name can also be used by the EXEC ORACLE IFDEF and EXEC ORACLE IFNDEF statements.

Syntax

DEFINE=name

Default

None

Usage Notes

Can be entered on the command line or inline. You can only use DEFINE to define a name--you cannot define macros with it. For example, the following use of define is not valid:

proc my_prog DEFINE=LEN=20 

Using DEFINE in the correct way, you could do

proc my_prog DEFINE=XYZZY 

And then in my_prog.pc, code

#ifdef XYZZY 
... 
#else 
... 
#endif 

Or, you could just as well code

EXEC ORACLE IFDEF XYZZY; 
... 
EXEC ORACLE ELSE; 
... 
EXEC ORACLE ENDIF; 

The following example is invalid:

#define XYZZY
...
EXEC ORACLE IFDEF XYZZY
...
EXEC ORACLE ENDIF;

EXEC ORACLE conditional statements are valid only if the macro is defined using EXEC ORACLE DEFINE or the DEFINE option.

If you define a name using DEFINE=, and then conditionally include (or exclude) a code section using the Pro*C/C++ precompiler #ifdef (or #ifndef) directives, you must also make sure that the name is defined when you run the C compiler. For example, for UNIX cc, you must use the -D option to define the name for the C compiler.

DURATION

Purpose

Sets the pin duration used by subsequent EXEC SQL OBJECT CREATE and EXEC SQL OBJECT DEREF statements. Objects in the cache are implicitly unpinned at the end of the duration.

Syntax

DURATION={TRANSACTION | SESSION}

Default

TRANSACTION

Usage Notes

Can be entered inline by use of the EXEC ORACLE OPTION statement.

TRANSACTION means that objects are implicitly unpinned when the transaction completes.

SESSION means that objects are implicitly unpinned when the connection is terminated.

DYNAMIC

Purpose

This micro option specifies the descriptor behavior in dynamic SQL Method 4. The setting of MODE determines the setting of DYNAMIC.

Syntax

DYNAMIC={ORACLE | ANSI}

Default

ORACLE

Usage Notes

Cannot be entered inline by use of the EXEC ORACLE OPTION statement.

See the DYNAMIC option settings in Table 14-2.

ERRORS

Purpose

Specifies whether error messages are sent to the terminal as well as the listing file (YES), or just to the listing file (NO).

Syntax

ERRORS={YES | NO}

Default

YES

Usage Notes

Can be entered only on the command line, or in a configuration file.

ERRTYPE

Purpose

Specifies an output file in which errors generated in processing type files are written. If omitted, errors are output to the screen. (See more about "INTYPE".)

Syntax

ERRTYPE=filename

Default

None

Usage Notes

Only one error file will be produced. If multiple values are entered, the last one is used by the precompiler.

FIPS

Purpose

Specifies whether extensions to ANSI SQL are flagged (by the FIPS Flagger). An extension is any SQL element that violates ANSI format or syntax rules, except privilege enforcement rules.

Syntax

FIPS={SQL89 | SQL2 | YES | NO}

Default

None

Usage Notes

Can be entered inline or on the command line.

When FIPS=YES, the FIPS Flagger is enabled, and warning (not error) messages are issued if you use an Oracle extension to ANSI SQL, or use an ANSI SQL feature in a nonconforming manner. Extensions to ANSI SQL that are flagged at precompile time include the following:

HEADER

Purpose

Permits precompiled header files. Specifies the file extension for precompiled header files.

Syntax

HEADER=extension

Default

NONE

Usage Notes

When precompiling a header file, this option is required and is used to specify the file extension for the output file that is created by precompiling that header file.

When precompiling an ordinary Pro*C/C++ program this option is optional. When given, it enables the use of the precompiled header mechanism during the precompilation of that Pro*C/C++ program.

In both cases, this option also specifies the file extension to use when processing a #include directive. If a #include file exists with the specified extension, then Pro*C/C++ will assume that the file is a precompiled header file previously generated by Pro*C/C++ and will instantiate the data from that file rather than process the #include directive and precompile the included header file.

This option is only allowed on the command line or in a configuration file. It is not allowed inline. When using this option, specify the file extension only. Do not include any file separators. For example, do not include a period `.' in the extension.

See "Precompiled Header Files" for usage.

HOLD_CURSOR

Purpose

Specifies how the cursors for SQL statements and PL/SQL blocks are handled in the cursor cache.

Syntax

HOLD_CURSOR={YES | NO}

Default

NO

Usage Notes

Can be entered inline or on the command line.

You can use HOLD_CURSOR to improve the performance of your program. For more information, see Appendix C, "Performance Tuning"

When a SQL data manipulation statement is executed, its associated cursor is linked to an entry in the cursor cache. The cursor cache entry is in turn linked to an Oracle private SQL area, which stores information needed to process the statement. HOLD_CURSOR controls what happens to the link between the cursor and cursor cache.

When HOLD_CURSOR=NO, after Oracle executes the SQL statement and the cursor is closed, the precompiler marks the link as reusable. The link is reused as soon as the cursor cache entry to which it points is needed for another SQL statement. This frees memory allocated to the private SQL area and releases parse locks.

When HOLD_CURSOR=YES and RELEASE_CURSOR=NO, the link is maintained; the precompiler does not reuse it. This is useful for SQL statements that are executed often because it speeds up subsequent executions. There is no need to re-parse the statement or allocate memory for an Oracle private SQL area.

For inline use with implicit cursors, set HOLD_CURSOR before executing the SQL statement. For inline use with explicit cursors, set HOLD_CURSOR before CLOSEing the cursor.

Note that RELEASE_CURSOR=YES overrides HOLD_CURSOR=YES and that HOLD_CURSOR=NO overrides RELEASE_CURSOR=NO. For information showing how these two options interact, see Table C-1.

INAME

Purpose

Specifies the name of the input file.

Syntax

INAME=path_and_filename

Default

None

Usage Notes

Can be entered only on the command line.

All input file names must be unique at precompilation time.

You can omit the filename extension if it is .pc. If the input filename is the first option on the command line, you can omit the INAME= part of the option. For example:

proc sample1 MODE=ansi 

to precompile the file sample1.pc, using ANSI mode. This command is the same as

proc INAME=sample1 MODE=ansi

INCLUDE

Purpose

Specifies a directory path for files included using the #include or EXEC SQL INCLUDE directives.

Syntax

INCLUDE=pathname or INCLUDE=(path_1,path_2,...,path_n)

Default

Current directory and paths built into Pro*C/C++.

Usage Notes

Can be entered inline or on the command line.

You use INCLUDE to specify a directory path for included files. The precompiler searches directories in the following order:

  1. the current directory

  2. the system directory specified in a SYS_INCLUDE precompiler option

  3. the directories specified by the INCLUDE option, in the order they are entered

  4. the built-in directories for standard header files

You normally do not need to specify a directory path for Oracle-specific header files such as sqlca.h and sqlda.h.

Note: If you specify an Oracle-specific filename without an extension for inclusion, Pro*C/C++ assumes an extension of .h. So, included files should have an extension, even if it is not .h.

For all other header files, the precompiler does not assume a .h extension.

You must still use INCLUDE to specify directory paths for non-standard files, unless they are stored in the current directory. You can specify more than one path on the command line, as follows:

... INCLUDE=path_1 INCLUDE=path_2 ...

Warning: If the file you want to include resides in another directory, make sure that there is no file with the same name in the current directory.

The syntax for specifying a directory path using the INCLUDE option is system specific. Follow the conventions used for your operating system

INTYPE

Purpose

Specifies one or more OTT-generated type files (only needed if Object types are used in the application).

Syntax

INTYPE=(file_1,file_2,...,file_n)

Default

None

Usage Notes

There will be one type file for each Object type in the Pro*C/C++ code.

LINES

Purpose

Specifies whether the Pro*C/C++ precompiler adds #line preprocessor directives to its output file.

Syntax

LINES={YES | NO}

Default

NO

Usage Notes

Can be entered only on the command line.

The LINES option helps with debugging. When LINES=YES, the Pro*C/C++ precompiler adds #line preprocessor directives to its output file.

Normally, your C compiler increments its line count after each input line is processed. The #line directives force the compiler to reset its input line counter so that lines of precompiler-generated code are not counted. Moreover, when the name of the input file changes, the next #line directive specifies the new filename.

The C compiler uses the line numbers and filenames to show the location of errors. Thus, error messages issued by the C compiler always refer to your original source files, not the modified source file.

When LINES=NO (the default), the precompiler adds no #line directives to its output file.

Note: In "Directives Ignored", it is stated that the Pro*C/C++ precompiler does not support the #line directive. This means that you cannot directly code #line directives in the precompiler source. But you can still use the LINES= option to have the precompiler insert #line directives for you.

LNAME

Purpose

Specifies the name of the listing file.

Syntax

LNAME=filename

Default

None

Usage Notes

Can be entered only on the command line.

The default filename extension for the listing file is .lis.

LTYPE

Purpose

Specifies the type of listing file generated.

Syntax

LTYPE={NONE | SHORT | LONG}

Default

SHORT

Usage Notes

Can be entered on the command line or in a configuration file.

When a listing file is generated, the LONG format is the default. With LTYPE=LONG specified, all of the source code is listed as it is parsed and messages listed as they are generated. In addition, the Pro*C/C++ options currently in effect are listed.

With LTYPE=SHORT specified, only the generated messages are listed--no source code--with line references to the source file to help you locate the code that generated the message condition.

With LTYPE=NONE specified, no list file is produced unless the LNAME option explicitly specifies a name for a list file. Under the latter condition, the list file is generated with LTYPE=LONG assumed.

MAXLITERAL

Purpose

Specifies the maximum length of string literals generated by the precompiler, so that compiler limits are not exceeded.

Syntax

MAXLITERAL=integer, range is 10 to 1024

Default

1024

Usage Notes

Cannot be entered inline.

The maximum value of MAXLITERAL is compiler dependent. For example, some C compilers cannot handle string literals longer than 512 characters, so you would specify MAXLITERAL=512.

Strings that exceed the length specified by MAXLITERAL are divided during precompilation, then recombined (concatenated) at run time.

You can enter MAXLITERAL inline but your program can set its value just once, and the EXEC ORACLE statement must precede the first EXEC SQL statement. Otherwise, Pro*COBOL issues a warning message, ignores the extra or misplaced EXEC ORACLE statement, and continues processing.

MAXOPENCURSORS

Purpose

Specifies the number of concurrently open cursors that the precompiler tries to keep cached.

Syntax

MAXOPENCURSORS=integer

Default

10

Usage Notes

Can be entered inline or on the command line.

You can use MAXOPENCURSORS to improve the performance of your program. For more information, see Appendix C, "Performance Tuning".

When precompiling separately, use MAXOPENCURSORS as described in "Programming Guidelines".

MAXOPENCURSORS specifies the initial size of the SQLLIB cursor cache. If a new cursor is needed, and there are no free cache entries, Oracle tries to reuse an entry. Its success depends on the values of HOLD_CURSOR and RELEASE_CURSOR, and, for explicit cursors, on the status of the cursor itself. Oracle allocates an additional cache entry if it cannot find one to reuse.

If necessary, Oracle keeps allocating additional cache entries until it runs out of memory or reaches the limit set by OPEN_CURSORS. MAXOPENCURSORS must be lower than OPEN_CURSORS by at least 6 to avoid a "maximum open cursors exceeded" Oracle error.

As your program's need for concurrently open cursors grows, you might want to respecify MAXOPENCURSORS to match the need. A value of 45 to 50 is not uncommon, but remember that each cursor requires another private SQL area in the user process memory space. The default value of 10 is adequate for most programs.

MODE

Purpose

Specifies whether your program observes Oracle practices or complies with the current ANSI/ISO SQL standards.

Syntax

MODE={ANSI | ISO | ORACLE}

Default

ORACLE

Usage Notes

Can be entered only on the command line or in a configuration file.

ISO is a synonym for ANSI.

When MODE=ORACLE (the default), your embedded SQL program observes Oracle practices. For example, a Declare Section is optional, and blanks are stripped.

When MODE=ANSI, your program complies fully with the ANSI SQL standard, and the following changes go into effect:

NLS_CHAR

Purpose

Specifies which C host character variables are treated by the precompiler as National Language Support (NLS) multi-byte character variables.

Syntax

NLS_CHAR=varname or NLS_CHAR=(var_1,var_2,...,var_n)

Default

None.

Usage Notes

Can be entered only on the command line, or in a configuration file.

This option allows you to specify at precompile time a list of the names of one or more host variables that the precompiler must treat as National Language character variables. You can specify only C char variables or Pro*C/C++ VARCHARs using this option.

If you specify in the option list a variable that is not declared in your program, then the precompiler generates no error.

NLS_LOCAL

Purpose

Determines whether NLS character conversions are performed by the precompiler runtime library, SQLLIB, or by the database server.

Syntax

NLS_LOCAL={NO | YES}

Default

NO

Usage Notes

When set to YES, local multi-byte support is provided by Pro*C/C++ and the SQLLIB library. The option NLS_CHAR must be used to indicate which C host variables are multi-byte.

When set to NO, Pro*C/C++ will use the database server support for multi-byte objects. Set NLS_LOCAL to NO for all new applications.

Environment variable NLS_NCHAR must be set to a valid fixed-width National Character Set. Variable-width National Character Sets are not supported.

Can be entered only on the command line, or in a configuration file.

OBJECTS

Purpose

Requests support for object types.

Syntax

OBJECTS={YES | NO}

Default

YES

Usage Notes

Can only be entered in the command line.

ONAME

Purpose

Specifies the name of the output file. The output file is the C code file that the precompiler generates.

Syntax

ONAME=path_and_filename

Default

INAME with a .c extension.

Usage Notes

Can be entered only on the command line. Use this option to specify the full pathname of the output file, where the pathname differs from that of the input (.pc) file. For example, if you issue the command:

proc iname=my_test 

the default output filename is my_test.c. If you want the output filename to be my_test_1.c, issue the command

proc iname=my_test oname=my_test_1.c 

Note that you should add the .c extension to files specified using ONAME because one is not added by default.

Attention: Oracle recommends that you not let the output filename default, but rather name it explicitly using ONAME. If you specify an ONAME value without an extension, the name of the generated file will not have one.

ORACA

Purpose

Specifies whether a program can use the Oracle Communications Area (ORACA).

Syntax

ORACA={YES | NO}

Default

NO

Usage Notes

Can be entered inline or on the command line.

When ORACA=YES, you must place either the EXEC SQL INCLUDE ORACA or #include oraca.h statement in your program.

PAGELEN

Purpose

Specifies the number of lines per physical page of the listing file.

Syntax

PAGELEN=integer

Default

80

Usage Notes

Cannot be entered inline. The value range allowed is 30..256..

PARSE

Purpose

Specifies the way that the Pro*C/C++ precompiler parses the source file.

Syntax

PARSE={FULL | PARTIAL | NONE}

Default

FULL

Usage Notes

See "Parsing Code" for more information on the PARSE option.

To generate C++ compatible code, the PARSE option must be either NONE or PARTIAL.

If PARSE=NONE or PARSE=PARTIAL, all host variables must be declared inside aDdeclare Section. See "Declare Section".

The variable SQLCODE must also be declared inside a declare section, or it cannot be relied on to detect errors. Check the default value of PARSE for your platform..

If PARSE=FULL, the C parser is used, and it does not understand C++ constructs, such as classes, in your code.

With PARSE=FULL or PARSE=PARTIAL Pro*C/C++ fully supports C preprocessor directives, such as #define, #ifdef, and so on. However, with PARSE=NONE conditional preprocessing is supported by EXEC ORACLE statements as described in "Conditional Precompilations".

Note: Some platforms have the default value of PARSE as other than FULL. See your system-dependent documentation.

PREFETCH

Purpose

Use this option to speed up queries by pre-fetching a number of rows.

Syntax

PREFETCH=integer

Default

1

Usage Notes

Can be used in a configuration file or on the command-line. The value of the integer is used for execution of all queries using explicit cursors, subject to the rules of precedence.

When used in-line it must placed before OPEN statements with explicit cursors. Then the number of rows pre-fetched when that OPEN is done is determined by the last in-line PREFETCH option in effect.

The value range allowed is 0.. 65535.

RELEASE_CURSOR

Purpose

Specifies how the cursors for SQL statements and PL/SQL blocks are handled in the cursor cache.

Syntax

RELEASE_CURSOR={YES | NO}

Default

NO

Usage Notes

Can be entered inline or on the command line.

You can use RELEASE_CURSOR to improve the performance of your program. For more information, see Appendix C, "Performance Tuning".

When a SQL data manipulation statement is executed, its associated cursor is linked to an entry in the cursor cache. The cursor cache entry is in turn linked to an Oracle private SQL area, which stores information needed to process the statement. RELEASE_CURSOR controls what happens to the link between the cursor cache and private SQL area.

When RELEASE_CURSOR=YES, after Oracle executes the SQL statement and the cursor is closed, the precompiler immediately removes the link. This frees memory allocated to the private SQL area and releases parse locks. To make sure that associated resources are freed when you CLOSE a cursor, you must specify RELEASE_CURSOR=YES.

When RELEASE_CURSOR=NO and HOLD_CURSOR=YES, the link is maintained. The precompiler does not reuse the link unless the number of open cursors exceeds the value of MAXOPENCURSORS. This is useful for SQL statements that are executed often because it speeds up subsequent executions. There is no need to re-parse the statement or allocate memory for an Oracle private SQL area.

For inline use with implicit cursors, set RELEASE_CURSOR before executing the SQL statement. For inline use with explicit cursors, set RELEASE_CURSOR before CLOSEing the cursor.

Note that RELEASE_CURSOR=YES overrides HOLD_CURSOR=YES and that HOLD_CURSOR=NO overrides RELEASE_CURSOR=NO. For a table showing how these two options interact, see Appendix C, "Performance Tuning".

SELECT_ERROR

Purpose

Specifies whether your program generates an error when a SELECT statement returns more than one row, or more rows than a host array can accommodate.

Syntax

SELECT_ERROR={YES | NO}

Default

YES

Usage Notes

Can be entered inline or on the command line.

When SELECT_ERROR=YES, an error is generated when a single-row SELECT returns too many rows, or when an array SELECT returns more rows than the host array can accommodate. The result of the SELECT is indeterminate.

When SELECT_ERROR=NO, no error is generated when a single-row SELECT returns too many rows, or when an array SELECT returns more rows than the host array can accommodate.

Whether you specify YES or NO, a random row is selected from the table. The only way to ensure a specific ordering of rows is to use the ORDER BY clause in your SELECT statement. When SELECT_ERROR=NO and you use ORDER BY, Oracle returns the first row, or the first n rows when you are SELECTing into an array. When SELECT_ERROR=YES, whether or not you use ORDER BY, an error is generated when too many rows are returned.

SQLCHECK

Purpose

Specifies the type and extent of syntactic and semantic checking.

Syntax

SQLCHECK={SEMANTICS | FULL | SYNTAX}

Default

SYNTAX

Usage Notes

SEMANTICS is the same as FULL.

Can be entered inline or on the command line.

See Appendix D, "Syntactic and Semantic Checking" for complete details.

SYS_INCLUDE

Purpose

Specifies the location of system header files.

Syntax

SYS_INCLUDE=pathname | (path1, ..., pathn)

Default

System-specific.

Usage Notes

Pro*C/C++ searches for standard system header files, such as stdio.h, in standard locations that are platform specific. For example, on almost all UNIX systems, the file stdio.h has the full pathname /usr/include/stdio.h.

But C++ compilers can have system header files, such as stdio.h, that are not in the standard system locations. You can use the SYS_INCLUDE command line option to specify a list of directory paths that Pro*C/C++ searches to look for system header files. For example:

SYS_INCLUDE=(/usr/lang/SC2.0.1/include,/usr/lang/SC2.1.1/include)

The search path that you specify using SYS_INCLUDE overrides the default header location

If PARSE=NONE, the value specified in SYS_INCLUDE is irrelevant for the precompilation, since there is no need for Pro*C/C++ to include system header files in the precompilation. (You must, of course, still include Oracle-specific headers, such as sqlca.h. and system header files, with #include directives for pre-processing by the compiler.)

The precompiler searches directories in the following order:

  1. the current directory

  2. the system directory specified in the SYS_INCLUDE precompiler option

  3. the directories specified by the INCLUDE option, in the order entered

  4. the built-in directory for standard header files

Because of step 3, you normally do not need to specify a directory path for standard header files such as sqlca.h and sqlda.h.

THREADS

Purpose

When THREADS=YES, the precompiler searches for context declarations.

Syntax

THREADS={YES | NO}

Default

NO

Usage Notes

Cannot be entered inline.

This precompiler option is required for any program that requires multi-threaded support.

With THREADS=YES, the precompiler generates an error if no EXEC SQL CONTEXT USE directive is encountered before the first context is visible and an executable SQL statement is found. For more information, see Chapter 11, "Multithreaded Applications".

TYPE_CODE

Purpose

This micro option specifies whether ANSI or Oracle datatype codes are used in dynamic SQL Method 4. Its setting is the same as the setting of MODE option.

Syntax

TYPE_CODE={ORACLE | ANSI}

Default

ORACLE

Usage Notes

Cannot be entered inline.

See the possible option settings in Table 14-3 .

UNSAFE_NULL

Purpose

Specifying UNSAFE_NULL=YES prevents generation of ORA-01405 messages when fetching NULLs without using indicator variables.

Syntax

UNSAFE_NULL={YES | NO}

Default

NO

Usage Notes

Cannot be entered inline.

The UNSAFE_NULL=YES is allowed only when MODE=ORACLE and DBMS=V7 or V6_CHAR.

The UNSAFE_NULL option has no effect on host variables in an embedded PL/SQL block. You must use indicator variables to avoid ORA-01405 errors.

USERID

Purpose

Specifies an Oracle username and password.

Syntax

USERID=username/password[@dbname]

Default

None

Usage Notes

Can be entered only on the command line.

Do not specify this option when using the automatic connect feature, which accepts your Oracle username prefixed with OPS$. The actual value of the "OPS$" string is set as a parameter in the INIT.ORA file.

When SQLCHECK=SEMANTICS, if you want the precompiler to get needed information by connecting to Oracle and accessing the data dictionary, you must also specify USERID.

VARCHAR

Purpose

Instructs the Pro*C/C++ precompiler to interpret some structs as VARCHAR host variables.

Syntax

VARCHAR={NO | YES}

Default

NO

Usage Notes

Can be entered only on the command line.

When VARCHAR=YES, a C struct that you code as

struct {
    short <len>;
    char  <arr>[n];
} name;

is interpreted by the precompiler as a VARCHAR[n] host variable.

VARCHAR can be used in conjunction with the NLS_CHAR option to designate a National Language variable.

VERSION

Purpose

Determines which version of the object will be returned by the EXEC SQL OBJECT DEREF statement.

Syntax

VERSION={RECENT | LATEST | ANY}

Default

RECENT

Usage Notes

Can be entered inline by use of the EXEC ORACLE OPTION statement.

RECENT means that if the object has been selected into the object cache in the current transaction, then that object is returned. For transactions running in serializable mode, this option has the same effect as LATEST without incurring as many network round-trips. Most applications should use RECENT.

LATEST means that if the object does not reside in the object cache, it is retrieved from the database. If It does reside in the object cache, it is refreshed from the server. Use LATEST with caution because it incurs the greatest number of network round-trips. Use LATEST only when it is imperative that the object cache is kept as coherent as possible with the server buffer cache

ANY means that if the object already resides in the object cache, return that object. If not, retrieve the object from the server. ANY incurs the fewest network round-trips. Use in applications that access read-only objects or when a user will have exclusive access to the objects.




Prev

Next
Oracle
Copyright © 1999 Oracle Corporation.

All Rights Reserved.

Library

Product

Contents

Index