Release 8.1.5
A67785-01
 Library |
 Product |
 Contents |
 Index |
| Oracle8i Error Messages Release 8.1.5 A67785-01 |
|
PRO-00001 Unable to open file string
Cause: The precompiler was unable to open a temporary file for internal use. There might be insufficient disk space, too many open files, or read-only protection on the output directory.
Action: Check that there is enough disk space, that the limit for open files is set high enough (check with the system manager) and that protection on the directory allows opening a file for writing.
PRO-00002 Invalid syntax at column number in line number of file string
Cause: There is a syntax error in an EXEC statement or the statement is not properly terminated.
Action: Correct the syntax of the EXEC statement. If the error occurred at the end of the input file, check that the last EXEC statement is properly terminated.
PRO-00003 Invalid SQL Identifier at column number in line number of file string
Cause: The symbol in a conditional precompilation statement (such as EXEC ORACLE IFDEF) is invalid, or the name of a SQL descriptor, statement, or cursor is invalid or was not properly declared.
Action: Check the statement syntax and spelling of the identifier and check that a reserved word was not accidentally used. If necessary, define the identifier in a variable declaration or DECLARE statement ahead of the line in error.
PRO-00004 Mismatched IF/ELSE/ENDIF block at line number in file string
Cause: There is an EXEC ORACLE ELSE or EXEC ORACLE ENDIF statement without a matching EXEC ORACLE IFDEF statement.
Action: Add the missing EXEC ORACLE IFDEF statement or delete or move the EXEC ORACLE ELSE or EXEC ORACLE ENDIF statement.
PRO-00005 Unsupported datatype in line number of file string
Cause: A host variable defined in the DECLARE section has an unsupported datatype or has a scale or precision outside the supported range.
Action: Redefine the host variable using a supported datatype. Check that the scale and precision of a numeric variable are in the accepted range.
PRO-00007 Invalid WHENEVER condition at column number in line number of file string
Cause: A condition other than SQLERROR, SQLWARNING, or NOT FOUND was specified in an EXEC SQL WHENEVER statement, or one of these was used, but spelled incorrectly.
Action: Correct the spelling of the WHENEVER condition or use a host- language IF statement to test the special condition.
PRO-00008 Invalid WHENEVER action at column number in line number of file string
Cause: At lease one of the following:
Action: Check that the host language allows the specified WHENEVER action. If necessary, correct the spelling of the WHENEVER action or correct the GOTO label.
PRO-00009 Invalid host variable at column number in line number of file string
Cause: A host variable used in an EXEC SQL statement was not declared in the DECLARE section or has an unsupported datatype.
Action: Declare the host variable in the DECLARE section, making sure it has one of the supported datatypes.
PRO-00010 Statement out of place at line number in file string
Cause: An EXEC statement was not placed properly in the host program. For example, there might be a data manipulation statement in the DECLARE section. In a Pro*COBOL program, the DECLARE section might be outside the WORKING-STORAGE or LINKAGE SECTION.
Action: Remove or relocate the statement.
PRO-00011 Already in a declare section at line number in file string
Cause: A BEGIN DECLARE SECTION statement was found inside a DECLARE section.
Action: Remove the extra BEGIN DECLARE SECTION statement.
PRO-00012 Not in a declare section at line number in file string
Cause: An END DECLARE SECTION statement without a matching BEGIN DECLARE SECTION statement was found. Either the BEGIN DECLARE SECTION statement is missing or misspelled or the END DECLARE SECTION statement is an extra.
Action: Add or correct the BEGIN DECLARE SECTION statement or remove the extra END DECLARE SECTION statement.
PRO-00013 Unable to open include file "string" at line number in file string
Cause: The precompiler was unable to open the input file specified in the INCLUDE statement. Some possible causes follow:
Action: Check that the file exists, that the search path to the file is correct, that sufficient privileges to access the file have been granted, and that it is not locked by another user. Also, check with the system manager to make sure there is enough disk space and that the limit for open files is set high enough.
PRO-00014 Undeclared SQL Identifier "string" at line number in file string
Cause: The name of a descriptor, statement, or cursor was not declared or is misspelled.
Action: Add or correct the descriptor, statement, or cursor declaration.
PRO-00015 Unrecognized Host Language syntax ignored at line number in file string
Cause: The host language syntax used to define a host variable in the DECLARE section is incorrect.
Action: Check the syntax and the spelling, then correct the declaration.
PRO-00016 Unable to open a cursor at line number in file string
Cause: The syntax in a SQL statement is faulty. The precompiler was expecting a host variable, but found something else.
Action: Check the syntax and the spelling, then correct the SQL statement.
PRO-00017 Unable to parse statement at line number in file string
Cause: There is a syntax error in an array declaration. The precompiler was expecting a right bracket (]) but found something else.
Action: Check the syntax, then correct the array declaration.
PRO-00018 Expected "string", but found "string" at line number in file string
Cause: The syntax in a SQL statement is faulty. The precompiler found an unexpected or illegal token.
Action: Check the syntax and the spelling, then correct the SQL statement.
PRO-00019 Unable to obtain bind variables at line number in file string
Cause: The precompiler was unable to find information about an input host variable (bind variable) used in a SQL statement.
Action: Check that the input host variable is declared in the DECLARE section and used properly in the SQL statement.
PRO-00020 Unable to obtain define variables at line number in file string
Cause: The precompiler was unable to find information about an output host variable (define variable) used in a SQL statement.
Action: Check that the output host variable is declared in the DECLARE section and used properly in the SQL statement.
PRO-00021 Oracle Error: string
Cause: An Oracle error occurred.
Action: Refer to the indicated message in the ORA message chapters of this manual.
PRO-00022 Out of space - unable to allocate number bytes
Cause: The precompiler process ran out of memory.
Action: Allocate more memory to the process, then retry.
PRO-00023 Unable to log off from ORACLE
Cause: An Oracle connection error occurred while the precompiler was trying to log off, probably because Oracle has been shut down.
Action: Check that Oracle is available, then retry.
PRO-00024 Indicator variable "string" has wrong type or length at line number in file string
Cause: An indicator variable was not declared in the DECLARE section as a 2-byte integer. Indicator variables must be defined as 2-byte integers.
Action: Redefine the indicator variable as a 2-byte integer.
PRO-00025 Undeclared indicator variable "string" at line number in file string
Cause: An indicator variable used in a SQL statement was not declared in the DECLARE section or its name is misspelled.
Action: Add or correct the indicator variable declaration.
PRO-00026 Invalid host variable "string" at line number in file string
Cause: A host variable used in a SQL statement was not declared properly. Some possible causes follow:
Action: Add or correct the host variable declaration.
PRO-00027 Redeclared SQL Identifier "string" at line number in file string
Cause: The name of a SQL descriptor, statement, or cursor was re-declared (that is, declared twice).
Action: Check the spelling of the identifier, then, if necessary, remove the extra declaration.
PRO-00028 Option "string" not legal as EXEC ORACLE OPTION
Cause: A precompiler option was specified inline in an EXEC ORACLE statement. Some options can be specified only on the command line. For example, INAME cannot be specified inline.
Action: Respecify the precompiler option on the command line, instead of in an EXEC ORACLE statement. To see an online display of the precompiler options, enter the precompiler command (with no options) at the operating-system prompt.
PRO-00029 Ambiguous option "string"
Cause: The name of a precompiler option was abbreviated ambiguously. For example, MAX= might refer to MAXLITERAL or MAXOPENCURSORS.
Action: Respecify the full option name or an unambiguous abbreviation. To see an online display of the precompiler options, enter the precompiler command (with no options) at the operating-system prompt.
PRO-00031 Invalid value given for option "string"
Cause: The value specified for a precompiler option is invalid, probably because the value is misspelled (as in LTYPE=HORT) or out of range (as in PAGELEN=-55).
Action: Check the value, making sure it is spelled correctly and within the legal range.
PRO-00032 Invalid option "string"
Cause: The precompiler found an invalid precompiler option name. Some possible causes follow:
Action: Check that the option exists and that its name is spelled correctly. To see an online display of the precompiler options, enter the precompiler command (with no options) at the operating- system prompt. Also check that there is an equal sign between the option name and value.
PRO-00033 Missing operand for option "string"
Cause: No value was specified for a precompiler option. Either the value is missing or there is space around the equal sign (as in LTYPE =SHORT).
Action: Check that a value for each option has been specified and there is no space around the equal sign.
PRO-00036 No input file name specified
Cause: The input file was not specified on the command line.
Action: Use the INAME command-line option to specify the input file.
PRO-00037 Unable to log on to ORACLE with "string". ORACLE error number: number
Cause: The precompiler was unable to log on to ORACLE with the specified username and password. An ORACLE error with given number occurred when the logon was attempted.
Action: Refer to the indicated message in the ORA message chapters of this manual.
PRO-00038 Unable to open a cursor
Cause: This is an internal error message not usually issued.
Action: Call Oracle Customer Support for assistance. If the application does not require syntactic or semantic checking of SQL statements and does not use PL/SQL, specify SQLCHECK=NONE on the command line.
PRO-00039 Unable to open input file "string"
Cause: The precompiler was unable to open the input file specified by the INAME precompiler option. Some possible causes follow:
Action: Check that the file exists, that the search path to the file is correct, that sufficient privileges have been granted to access the file, and that it is not locked by another user. Check with the system administrator to make sure that there is enough disk space and that the limit for open files is set high enough.
PRO-00040 Unable to open listing file "string"
Cause: The precompiler was unable to open the listing file specified by the LNAME precompiler option. Some possible causes follow:
Action: Check that the file exists, that the search path to the file is correct, that sufficient privileges have been granted to access the file, and that it is not locked by another user. Also check that there is enough disk space and that the limit for open files is set high enough (check with the system manager). If a listing file is not needed, specify LTYPE=NONE on the command line.
PRO-00041 Unable to open output file "string"
Cause: The precompiler was unable to open the listing file specified by the ONAME precompiler option. Some possible causes follow:
Action: Check that the file exists, that the search path to the file is correct, that sufficient privileges have been granted to access the file, and that it is not locked by another user. Check with the system administrator to make sure that there is enough disk space and that the limit for open files is set high enough.
PRO-00042 Must EXEC SQL INCLUDE SQLCA when mode=ANSI and WHENEVER SQLWARNING used
Cause: When MODE={ANSI | ANSI14}, an attempt was made to use the WHENEVER SQLWARNING statement without declaring the SQLCA. When MODE={ANSI | ANSI14}, declaring the SQLCA is optional, but to use the WHENEVER SQLWARNING statement, the SQLCA must be declared.
Action: Remove all WHENEVER SQLWARNING statements from the program or declare the SQLCA by hardcoding it or copying it into the program with the INCLUDE statement.
PRO-00044 Array size mismatch in INTO/USING. Minimum is: string(number:number)
Cause: The size of an array variable in an INTO/USING clause is too small for the number of rows processed.
Action: Declare all array variables in the INTO/USING clause to have at least the minimum dimension given.
PRO-00045 string clause inappropriate at line number in file string. Ignored.
Cause: There is a misplaced clause at the end of an EXEC SQL statement (an AT clause at the end of a SELECT statement, for example), or the action specified in a FOR clause is invalid (for example, FOR :loop INTO...).
Action: Check the statement syntax, then relocate or correct the misplaced or invalid clause.
PRO-00047 Unterminated comment/string constant beginning near line number in file string
Cause: A string constant is missing an ending quotation mark, or a comment is missing an ending delimiter.
Action: Check that all comments are delimited and all string constants are enclosed by quotation marks.
PRO-00050 Unable to generate descriptor in program unit ending line number in file string
Cause: The precompiler was unable to generate a descriptor for the compilation unit. This can occur from either of the following:
Action: Verify that the DECLARE section is properly implemented. Then check for syntax errors at the beginning of the compilation unit and before any END DECLARE SECTION statement, and correct as appropriate.
PRO-00051 Size of VARCHAR string is larger than 65533 in line number in file string
Cause: The declared size of a VARCHAR host variable exceeds the precompiler limit of 65533 bytes.
Action: Check the DECLARE section, making sure the size of each VARCHAR variable does not exceed the limit of 65533 bytes.
PRO-00053 FOR variable string is invalid type at line number in file string
Cause: The count variable in a FOR clause has the wrong datatype. The datatype must be NUMBER or LONG (or be compatible with NUMBER or LONG).
Action: Check the declaration and check that the count variable has a datatype of NUMBER or LONG (or a compatible Oracle or host-language datatype).
PRO-00054 Expected End-of-Statement at column number in line number of file string
Cause: The precompiler expected to find a statement terminator at the end of an EXEC statement but found something else. This can happen if tabs were embedded in the source code (because the precompiler has no way of knowing how many spaces a tab represents).
Action: If tabs are embedded in the source code, replace them with spaces. Check the statement syntax and check that each EXEC statement has a terminator. For embedded CREATE {FUNCTION | PROCEDURE | PACKAGE} statements and for embedded PL/SQL blocks, check that the statement terminator is END-EXEC.
PRO-00055 Array "string" not allowed as bind variable at line number in file string
Cause: A host array was used as a bind (input) variable in the WHERE clause of a SELECT statement. This is not allowed.
Action: Remove the host array or replace it with a simple host variable.
PRO-00056 FOR clause not allowed on SELECT statement at line number in file string.
Cause: A FOR clause was used with a SELECT statement. This is not allowed as data returned from the last loop in the execution of the SELECT overwrites data returned in a previous loop.
Action: Remove the FOR clause from the SELECT statement and use a host- language construct to iteratively execute the SELECT statement.
PRO-00060 Both CURSOR and STATEMENT have AT clauses at line number of file string.
Cause: Two AT clauses, one in a DECLARE STATEMENT statement, the other in a DECLARE CURSOR statement, pertain to the same SQL statement. The AT clause may be specified with either DECLARE STATEMENT or DECLARE CURSOR, but not with both.
Action: Remove the AT clause from one of the statements.
PRO-00061 Error at line number, column number. PLS-number: string
Cause: The precompiler found an error in an embedded SQL statement or PL/SQL block.
Action: Refer to the indicated PL/SQL error message to correct the SQL statement or embedded PL/SQL block.
PRO-00062 Must use option SQLCHECK=SEMANTICS(FULL) when there is embedded PL/SQL
Cause: The precompiler tried to parse an embedded PL/SQL block when SQLCHECK={SYNTAX | NONE}. PL/SQL blocks can be parsed only when SQLCHECK=SEMANTICS is specified.
Action: Remove the PL/SQL block or specify SQLCHECK=SEMANTICS.
PRO-00063 Reached end of file string before End-of-Statement at line number!
Cause: The precompiler encountered an end-of-file while parsing a PL/SQL block.
Action: Add the appropriate statement terminator (;) or end-of-block statement (END;) to the PL/SQL block.
PRO-00064 All uses of a given host variable must use identical indicator variables.
Cause: Two or more occurrences of a host variable in an EXEC SQL statement were associated with different indicator variables. This is not allowed.
Action: Rename the indicator variables so that each occurrence of the host variable is associated with the same indicator variable.
PRO-00065 Userid required, but not specified.
Cause: The SQLCHECK=SEMANTICS option was specified, but the USERID option on the command line was not specified.
Action: Specify USERID=username/password or enter a username and password when prompted or specify SQLCHECK={SYNTAX | NONE}.
PRO-00066 Userid only used when SQLCHECK = FULL, userid ignored.
Cause: The USERID option was specified when SQLCHECK={SYNTAX | NONE}. This is unnecessary.
Action: Specify the USERID option only when SQLCHECK=SEMANTICS.
PRO-00067 Ireclen exceeded. Line number in file string truncated.
Cause: While reading the input file, the precompiler found a line longer than IRECLEN.
Action: Either shorten the input line or specify a larger IRECLEN value on the command line.
PRO-00068 Host and indicator variables may not have the same name.
Cause: In an EXEC SQL statement, an indicator variable had the same name as a host variable. The names of a host variable and its associated indicator variable must be different. Also, an indicator variable cannot be used as a host variable.
Action: Rename the host or indicator variable.
PRO-00069 Host variable "string" has unsupported datatype at line number in file string
Cause: A host variable had an unsupported datatype. For a list of supported datatypes, see the language-specific Precompiler Programmer's Guide.
Action: Redefine the host variable in the DECLARE section, giving it a supported datatype.
PRO-00070 Illegal syntax, Exponential value in SQL statement: string
Cause: The precompiler found a syntax error while parsing a number coded in scientific notation. The precompiler expected to find a signed integer following the exponentiation indicator (E), but found something else.
Action: Reformat the number correctly.
PRO-00071 Unable to open message file.
Cause: The precompiler was unable to open the message file containing the messages that can be issued by the precompiler. This can happen if there are too many open files or if there were problems with installation of the precompiler.
Action: Check that the limit for open files is high enough (check with the system manager). Otherwise, contact Oracle Customer Support.
PRO-00072 Input file name length exceeds the maximum length
Cause: The file name length specified exceeded the maximum length. Some operating systems have a maximum file name length.
Action: Use a file name of length less than or equal to the maximum platform specific file name length.
PRO-00073 Cursor is declared but never OPENed at line number in file string.
Cause: A cursor was DECLAREd but was not referenced in an OPEN statement. This is only an informational message.
Action: Remove the cursor declaration or code an OPEN statement for the cursor.
PRO-00075 ":" expected before indicator variable
Cause: An indicator variable was not prefixed with a colon, as required.
Action: Prefix a colon to the indicator variable in question.
PRO-00076 DISPLAY type must be SIGN LEADING SEPARATE
Cause: This message is issued only by Pro*COBOL. DISPLAY SIGN LEADING SEPARATE is the only DISPLAY type supported by Pro*COBOL.
Action: Check the spelling of the variable declaration. If necessary, remove the reference to the unsupported DISPLAY type.
PRO-00077 Colon usage with numeric label in WHENEVER statement is not ANSI
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, a numeric WHENEVER ... GOTO label was prefixed with a colon. For example the code might have looked like:
EXEC SQL WHENEVER SQLERROR GOTO :99;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, prefix alphanumeric (but not numeric) WHENEVER ... GOTO labels with a colon.
PRO-00078 FIPS warning: Invalid ANSI SQL Identifier
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, the name given to a host variable:
In the following Pro*C example, the host variable name is 19 characters long and therefore non-compliant:
EXEC SQL BEGIN DECLARE SECTION; int department_location: -- not ANSI/ISO compliant EXEC SQL END DECLARE SECTION;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, change the host variable name so that it is less than or equal to 18 characters long, begins with a letter, and does not contain consecutive or trailing underscores.
PRO-00079 ANSI requires colon on label in WHENEVER statement
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, an alphanumeric WHENEVER ... GOTO label was not prefixed with a colon. For example the offending code might look like:
EXEC SSQL WHENEVER NOT FOUND GOTO NO_MORE;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, prefix alphanumeric (but not numeric) WHENEVER ... GOTO labels with a colon.
PRO-00080 TYPE identifier already TYPEd
Cause: The identifier being TYPEd in an EXEC SQLY TYPE statement appeared in a previous EXEC SQL TYPE statement. A given identifier can appear in only one EXEC SQL TYPE statement.
Action: Check the spelling of the identifiers. Use different identifiers in the EXEC SQL TYPE statements, or remove one of the EXEC SQL TYPE statements.
PRO-00081 Scale specification not allowed for given datatype
Cause: The Oracle external datatype referenced in an EXEC SQL VAR or EXEC SQL TYPE statement does no allow a scale specification.
Action: Check the precision specification and remove the scale specification.
PRO-00082 Length and scale specifications must be an integer
Cause: A floating point number or a non-number to specify a length or scale was used. Only integers can be used.
Action: Correct or remove the length and/or scale specification.
PRO-00083 Bind and define variables not allowed in CREATE statement
Cause: Host variables cannot appear in a CREATE statement. If the makeup of a CREATE statement cannot be known until run time, a dynamic SQL statement must be used to execute it. That is, the program must accept or build the CREATE statement at run time, store it in a host string, then EXECUTE it.
Action: Correct or remove the erroneous CREATE statement.
PRO-00085 Error writing to file string
Cause: The precompiler was unable to write to the named output file. Some possible causes follow:
Action: Check that sufficient privileges exist to access the file and that it is not locked by another user. Check with the system administrator to make sure that there is enough disk space and that the limit for open files is set high enough.
PRO-00086 Source file string has zero length
Cause: The source file specified on the command line contains no code. Consequently, there is nothing for the precompiler to process.
Action: Specify a valid source file containing embedded SQL statements.
PRO-00087 EXEC SQL TYPE statement not allowed for this host language
Cause: An EXEC SQL TYPE statement was used with a host language that does not support user-defined datatype equivalencing. This feature is available only in Pro*C and Pro*Pascal.
Action: Remove the offending EXEC SQL TYPE statement.
PRO-00088 User defined type identifier expected
Cause: The user-defined datatype name in an EXEC SQL TYPE statement is missing or misspelled, is a reserved word, is not a legal identifier in the host-language or conflicts with a base datatype in that language.
Action: Check the spelling of the user-defined datatype name. If necessary, declare a valid user-defined datatype. User-defined datatype equivalencing is available only in Pro*C and Pro*Pascal.
PRO-00089 Invalid Oracle TYPE specification
Cause: The Oracle external datatype name in an EXE SQL TYPE or EXEC SQL VAR statement is missing or misspelled.
Action: Check the spelling of the external datatype name. If necessary, supply the missing datatype name.
PRO-00090 Precision/scale specification must be given for DECIMAL datatype
Cause: A precision and/or scale specification for the Oracle external datatype DECIMAL in an EXEC SQL TYPE or EXEC SQL VAR statement was omitted.
Action: Add the precision and/or scale specification to the EXEC SQL TYPE or EXEC SQL VAR statement.
PRO-00091 TYPE statement requires format specification for this Oracle datatype
Cause: A length, precision, and/or scale specification for an Oracle external datatype in an EXEC SQL TYPE or EXEC SQL VAR statement was omitted.
Action: Add the length, precision, and/or scale specification for the external datatype to the EXEC SQL TYPE or EXEC SQL VAR statement.
PRO-00092 Length and/or scale incompatible with specified Oracle datatype
Cause: An invalid length or scale for an Oracle external datatype in an EXEC SQL TYPE or EXEC SQL VAR statement was specified.
Action: Check that a length large enough to accommodate the external datatype is specified. If a scale is specified, check that it lies in the range -84 to 99.
PRO-00093 Invalid or obsolete option, ignored
Cause: The precompiler found an option available in a prior version or different host language but not in the current version or host language.
Action: Remove the option specification.
PRO-00094 Array length for char[n] datatype must be >= 2
Cause: When MODE={ANSI | ANSI14}, a length of less than 2 characters for a char[n] host variable was specified or a simple char variable was specified. When MODE={ANSI | ANSI14}, the length must be at least 2 characters. This message is issued only by the Pro*C precompiler.
Action: Correct the declaration so that it specifies a length of at least 2 characters.
PRO-00095 Missing PROGRAM, SUBROUTINE, FUNCTION, or BLOCK DATA statement
Cause: FORTRAN source files are expected to have at least one PROGRAM, SUBROUTINE, FUNCTION, or BLOCK DATA statement, which the precompiler uses to detect the beginning of a routine or compilation unit.
Action: Add one of these statements to the source file.
PRO-00096 Array FETCH not allowed for mode=ANSI14
Cause: When MODE=ANSI14, an array SELECT or FETCH was attempted. However, array operations are not allowed with MODE=ANSI14.
Action: If MODE=ANSI14 must be specified, place the SELECT or FETCH statement in a host-language loop, instead of using the array interface.
PRO-00097 Use of DECIMAL and DISPLAY types allowed only for COBOL and PL/I
Cause: The DECIMAL and DISPLAY external datatype was used in an EXEC SQL VAR or EXEC SQL TYPE statement with an Oracle precompiler other than Pro*COBOL or PRO*PL/I. These external datatypes are available only in Pro*COBOL and PRO*PL/I.
Action: Remove the reference to the DECIMAL or DISPLAY external datatype from the EXEC SQL TYPE or EXEC SQL VAR statement.
PRO-00098 Scale specification cannot be used in this context
Cause: In a Pro*C, Pro*FORTRAN, Pro*Pascal program, scale in an EXEC SQL TYPE or EXEC SQL VAR statement in the current context cannot be specified.
Action: Remove the scale specification from the EXEC SQL TYPE or EXEC SQL VAR statement.
PRO-00099 Length cannot be given for types ROWID, DATE, or MLSLABEL
Cause: A length for the ROWID, DATE, or MLSLABEL external datatype was specified in an EXEC SQL TYPE or EXEC SQL VAR statement. This is unnecessary because those are fixed length types.
Action: Remove the length specification from the EXEC SQL TYPE or EXEC SQL VAR statement.
PRO-00100 Non integer label is not ANSI
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, a non-integer WHENEVER ... GOTO label was in a Pro*Pascal program. For example, the offending code might look like:
EXEC SQL WHENEVER NOT FOUND GOTO quit;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, use only integer WHENEVER... GOTO labels in a Pro*Pascal program.
PRO-00101 Lower case 'e' in floating point number is not ANSI
Cause: A Oracle extension to the ANSI/ISO SQL standard was used. Specifically, a lowercase 'e' was used in scientific notation. For example, the offending code might look like:
maxnum = 10e38;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, use an uppercase 'E' in scientific notation.
PRO-00102 FOR UPDATE is an Oracle extension
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, the FOR UPDATE OF clause was used in a cursor declaration. For example, the offending code might look like:
EXEC SQL DECLARE emp_cursor CURSOR FOR SELECT ENAME, SAL FROM EMP WHERE DEPTNO = :dept_number FOR UPDATE OF SAL;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use the FOR UPDATE OF clause.
PRO-00103 AT clause is an Oracle extension
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, the AT db_name clause was used in a SQL statement. For example, the offending code might look like:
EXEC SQL AT oracle3 COMMIT RELEASE;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use the AT db_name clause.
PRO-00104 FOR clause is an Oracle extension
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, the FOR clause was used in an array-processing SQL statement. For example, the offending code might look like:
EXEC SQL FOR :limit INSERT INTO EMP (EMPNO, JOB, DEPTNO) VALUES (:emp_ number, :job_title, :dept_number);
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use the FOR clause.
PRO-00105 Keyword WORK required here by ANSI
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, the keyword WORK was used in a COMMIT or ROLLBACK statement. For example, the offending code might look like:
EXEC SQL COMMIT WORK RELEASE;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use the keyword WORK.
PRO-00106 RELEASE is an Oracle extension to the COMMIT and ROLLBACK statements
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, the parameter RELEASE was used in a COMMIT or ROLLBACK statement. For example, the offending code might look like:
EXEC SQL ROLLBACK RELEASE;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use the parameter RELEASE;
PRO-00107 The CONNECT statement is Oracle implementation dependent
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, the CONNECT statement was used to log on to ORACLE. For example, the offending code might look like:
EXEC SQL CONNECT :username IDENTIFIED BY :password;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, specify the AUTO_CONNECT command-line option instead of using a CONNECT statement.
PRO-00108 This statement is not supported by ANSI
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, a nonconforming SQL statement such as PREPARE was used. For example, the offending code might look like:
EXEC SQL PREPARE sql_statement FROM :sql_string;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use the nonconforming statement.
PRO-00109 Dynamic SQL and PL/SQL are Oracle extensions to ANSI SQL
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, dynamic SQL or embedded PL/SQL was used. For example, the offending code might look like:
XEC SQL EXECUTE BEGIN SELECT ... END; END-EXEC;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use dynamic SQL or embedded PL/SQL.
PRO-00110 Oracle extension to the WHENEVER statement
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, a nonconforming keyword such as NOTFOUND, STOP, RAISE, or DO was used in the WHENEVER statement. (Note that NOT FOUND is ANSI-compliant.) For example, the offending code might look like:
EXEC SQL WHENEVER SQLERROR STOP;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use the nonconforming keyword.
PRO-00111 SQLCHECK value in EXEC ORACLE statement exceeds command line value
Cause: The SQLCHECK option was entered inline and specified a level of checking higher than the level specified (or accepted by default) on the command line. This is not allowed. For example, if SQLCHECK={SYNTAX | LIMITED} is specified on the command line, SQLCHECK={SEMANTICS | FULL} cannot be specified inline.
Action: Revise the EXEC ORACLE statement or specify a lower level of checking on the command line.
PRO-00112 Datatype not supported by ANSI
Cause: An Oracle extension to the ANSI/ISO standard was used. Specifically, a pointer or nonconforming datatype such as VARCHAR was used. For example, the offending code might look like:
EXEC SQL BEGIN DECLARE SECTION VARCHAR username[20]; EXEC SQL END DECLARE SECTION
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use pointers or nonconforming datatypes.
PRO-00113 Value of DBMS option invalid with given value of MODE option
Cause: When MODE={ANSI14 | ANSI13}, DBMS=V7 was specified, or when MODE=ANSI, DBMS=v6 was specified. These option settings are incompatible. Note that the DBMS option was not available before release 1.5 of the Oracle Precompilers.
Action: With DBMS=V7, instead of MODE={ANSI14 | ANSI13}, specify MODE={ANSI | ORACLE}. With DBMS=V6, instead of MODE=ANSI, specify MODE={ANSI14 | ANSI13 | ORACLE}, but MODE=ORACLE is recommended.
PRO-00114 Length spec required in EXEC SQL VAR statements for VARxxx types
Cause: In an EXEC SQL VAR statement, a VARCHAR or VARRAW external datatype was specified without a length. Unlike other types, the maximum length of the data field must be specified for VARCHAR and VARRAW.
Action: Add a length specification to the EXEC SQL VAR statement.
PRO-00115 Array required here
Cause: In an ARRAYLEN statement, the name of a previously declared host array was not specified. The first host variable in an ARRAYLEN statement must be an array. The second host variable, which specifies an array dimension, must be a 4-byte integer. The correct syntax follows:
EXEC SQL ARRAYLEN host_array (dimension);
The ARRAYLEN statement must appear in the DECLARE section along with, but somewhere after, the declarations of host_array and dimension.
Action: Check the spelling of both identifiers in the ARRAYLEN statement. If necessary, supply the missing host array name.
PRO-00116 This array already given in an ARRAYLEN statement
Cause: The same host array was specified in two different ARRAYLEN statements. A given host array cannot be specified in more than one ARRAYLEN statement.
Action: Check the spelling of the host array names in both ARRAYLEN statements. Change one of the names so that they refer to different host arrays or remove one of the ARRAYLEN statements.
PRO-00117 Invalid ARRAYLEN length variable type
Cause: A valid array dimension was not specified in an ARRAYLEN statement. The array dimension must be specified using a previously declared 4-byte integer host variable, not a literal or expression. For example, the offending code might look like:
EXEC SQL ARRAYLEN ename_array (25); -- illegal dimension
Action: Supply a valid array dimension. If necessary, declare a 4-byte integer host variable for use in the ARRAYLEN statement.
PRO-00118 Use of host variable initialization not supported by ANSI SQL
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, a host variable was initialized in its declaration, as shown in the following Pro*C example:
EXEC SQL BEGIN DECLARE SECTION; int dept_number = 20; -- not ANSI/ISO-compliant EXEC SQL END DECLARE SECTION;
This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not initialize host variables in their declarations.
PRO-00119 Value of const variable in INTO clause will be modified
Cause: A variable declared with the type specifier "const" was used in an INTO clause. Such variables should not be modified and should not be used in an INTO clause.
Action: Check the spelling of all identifiers in the INTO clause. If necessary, remove "const" from the host variable declaration or use a different host variable.
PRO-00120 File I/O error during code generation
Cause: A file I/O error occurred during code generation. This may be caused by insufficient disk space.
Action: Check that there is enough disk space.
PRO-00121 Arrays of VARCHAR pointers are not supported
Cause: An array of pointers was declared, which is not allowed. However, pointers to scalar types are allowed. With Pro*C, declare pointers to char[n] and varchar[n] variables as pointers to CHAR or VARCHAR (with no length specification).
Action: Correct or remove the declaration.
PRO-00122 Input file name and output file name are identical
Cause: On the command line, the same path name for INAME and ONAME was specified, which designates the precompiler input and output files, respectively.
Action: Change one of the path/file names.
PRO-00123 Entire VARCHAR declaration must be on same line
Cause: In a Pro*C program, a VARCHAR declaration spans more than one line, which is not allowed.
Action: Revise the declaration so that it uses only one line.
PRO-00124 COMMON_NAME option is specified too late
Cause: In a FORTRAN program, subroutine, or function, the precompiler option COMMON_NAME was mistakenly specified after the PROGRAM, SUBROUTINE, or FUNCTION statement. If COMMON_NAME is specified inline, its EXEC ORACLE OPTION statement must precede the PROGRAM SUBROUTINE, or FUNCTION statement.
Action: Relocate the EXEC ORACLE OPTION statement or specify COMMON_NAME on the command line.
PRO-00126 Could not find or open system configuration file
Cause: The precompiler was unable to find or open the system configuration file (a text file containing preset command-line options, which the precompiler uses by default). Some possible causes follow:
However, this message is just a warning. Processing continues even if the system configuration file does not exist.
Action: Check that the file exists, that the search path to the file is correct, and that sufficient privileges exist to access the file. Also check that the limit for open files is set high enough (check with the system manager).
PRO-00127 string
Cause: This is a generic error message from the command-line processor.
Action: Correct the indicated error.
PRO-00128 Command line processor severe error
Cause: The command line processor encountered a severe error.
Action: After making sure that all the command-line options are specified correctly, call Oracle Customer Support with a full account of all the options and configuration files used.
PRO-00129 Option "string" must be given
Cause: A required command-line option is missing. For example, the INAME option, which specifies the name of the input file, might be missing.
Action: Supply the missing command-line option.
PRO-00132 Indicator array size must not be less than its host variable
Cause: An host variable array was used with an indicator array declared with a smaller dimension. For example:
EXEC SQL BEGIN DECLARE SECTION; int dept_no[20]; short dept_no_ind[10]; EXEC SQL END DECLARE SECTION; ... SELECT ... INTO dept_no:dept_no_ind ...
Action: Increase the size of the indicator array.
PRO-00133 Command line option MODE=ANSI required with option NLS_LOCAL=YES
Cause: The precompiler option NLS_LOCAL=YES was used without also specifying MODE=ANSI. The precompiler option MODE=ANSI must be specified if NLS_LOCAL=YES.
Action: Set the precompiler option MODE=ANSI in addition to NLS_LOCAL=YES or do not set NLS_LOCAL=YES.
PRO-00135 Result Set Cursor usage is not standard SQL
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, an Oracle Result Set Cursor has been used. This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action required. However, for ANSI/ISO compliance, do not use Result Set Cursors.
PRO-00136 Invalid SQL_CURSOR declaration
Cause: An array of SQL_CURSOR host variables was declared or, if Pro*COBOL, a PICTURE clause was specified in the SQL-CURSOR declaration. In Pro*FORTRAN, a length specification (that is, "*n") on the SQL_CURSOR declaration could have been specified. These usages are not supported.
Action: Check that the SQL_CURSOR variable is not declared as an array or, if Pro*COBOL, that no PICTURE clause is specified for the SQL_CURSOR. In Pro*FORTRAN, check that there is no length specification (that is, "*n") for the SQL_CURSOR.
PRO-00137 Invalid use of SQL cursor host variable
Cause: A SQL_CURSOR variable was used in an INTO or WHERE clause. SQL_CURSOR variables can be used only where ordinary cursor identifiers would be used or, in a PL/SQL block, where a cursor would normally be used.
Action: Remove the SQL cursor variable reference from the INTO clause or WHERE clause, or use a host variable of another type in the INTO or WHERE clause.
PRO-00138 Result Set Cursors are not implemented in this precompiler
Cause: There was an attempt to reference a host variable as a cursor reference. Cursor variables are not implemented in PRO*Pascal or Pro*PL/I.
Action: Rewrite your host-language code to use standard SQL cursors.
PRO-00139 Cannot change MAXLITERAL after an EXEC SQL statement
Cause: The MAXLITERAL option has been used in an inline EXEC ORACLE OPTION statement after and EXEC SQL, EXEC TOOLS, or EXEC IAF statement. This is not allowed.
Action: Use the MAXLITERAL option only on the command line or in an EXEC ORACLE OPTION statement placed at the beginning of the input source file.
PRO-00140 CREATE FUNCTION/PROCEDURE/PACKAGE/TRIGGER are Oracle extensions
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, one of the following statements was used:
These statements are Oracle extensions to the ANSI/ISO SQL standards. This informational message is issued by the FIPS Flagger when FIPS=YES.
Action: No action is required. However, for ANSI/ISO compliance, do not use any of these statements.
PRO-00141 Thread Safety is not implemented in this precompiler
Cause: There has been an attempt to use CONTEXT SQL statements. The thread safety feature is not implemented in PRO*Pascal, Pro*PL/I, or Pro*C 1.x.
Action: Rewrite your host-language code to not use contexts.
PRO-00142 No EXEC SQL CONTEXT USE statement encountered
Cause: No EXEC SQL CONTEXT USE statement was encountered and the option THREADS=YES was requested.
Action: Ensure that the necessary context variable (of type SQL_CONTEXT) has been declared, ALLOCATEd, and USEd prior to any executable SQL statements.
PRO-00143 Runtime context variable not of correct type
Cause: The runtime context variable referenced in an EXEC SQL CONTEXT USE statement is not of type SQL_CONTEXT.
Action: Declare your runtime context variable of type SQL_CONTEXT.
PRO-00144 UNSAFE_NULL=YES must be used with DBMS=V7 and MODE=ORACLE
Cause: The option UNSAFE_NULL=YES has been used with DBMS=V6 or DBMS=NATIVE (the default) or has been used with MODE=ANSI/ANSI14/ANSI13.
Action: Either specify DBMS=V7 and MODE=ORACLE (the default) when using UNSAFE_NULL=YES or do not use UNSAFE_NULL=YES.
PRO-00145 This statement can only be used with THREADS=YES
Cause: EXEC SQL ENABLE THREADS or one of the EXEC SQL CONTEXT statements has been used, even though option THREADS is set to NO.
Action: Specify option THREADS=YES or remove the EXEC ENABLE THREADS or EXEC SQL CONTEXT statement from the source code.
PRO-00146 Illegal value for host option, ignored
Cause: An invalid host language was specified using the command-line host option. The host option valid values are Pro* language-specific. For example, for PROFOR, the only valid value is FORTRAN. For PROCOB, the only valid values are COBOL and COB74.
Action: Specify a valid host language with the host option.
PRO-00147 DBMS=V6 no longer supported; using DBMS=NATIVE
Cause: V6 compatibility is no longer supported. The precompiler will precompile as though DBMS=NATIVE was specified.
Action: Revise the specified DBMS option value from v6 to another value as desired.
PRO-01000 You are not authorized to run Pro*COBOL
Cause: The authorization or license to run the Pro*COBOL Precompiler has expired.
Action: Call Oracle Customer Support for assistance.
PRO-01001 Your Pro*COBOL authorization is about to expire
Cause: The authorization or license to run the Pro*COBOL Precompiler is about to expire.
Action: Call Oracle Customer Support for assistance.
PRO-01002 Invalid character "character" in indicator area at line number in file string
Cause: In a Pro*COBOL Precompiler program, only a blank, hyphen (-), asterisk (*), slash (/), or letter "D" is allowed in the indicator area, but the precompiler found another character.
Action: Remove or replace the invalid character. If the FORMAT=ANSI option is specified, check for an end-of-line in column 7.
PRO-01003 Invalid continuation at line number in file string
Cause: In a PRO*COBOL program, a continuation line was completely blank, except for the continuation character.
Action: Remove or replace the empty continuation line.
PRO-01004 In an EXEC statement at end-of-file
Cause: In a Pro*COBOL input file, the last EXEC statement was not terminated properly.
Action: Terminate the last EXEC statement with an END-EXEC.
PRO-01005 PROCEDURE DIVISION not found
Cause: The precompiler could not find the PROCEDURE DIVISION header in a Pro*COBOL program. Some possible causes follow:
Action: Check that the PROCEDURE DIVISION header is in place and spelled correctly, that there is no apostrophe in the REMARKS section, that all literals in the WORKING-STORAGE SECTION are terminated, and that the right value for the FORMAT option is specified.
PRO-01006 EXEC statement cannot begin in Area A at line number in file string
Cause: In a Pro*COBOL program, EXEC statements must begin in Area B, but the precompiler found a statement beginning in Area A.
Action: Move the statement rightward so that it begins in Area B.
PRO-01007 WORKING-STORAGE SECTION not found
Cause: The precompiler could not find the WORKING-STORAGE SECTION header in a Pro*COBOL program, probably because a keyword is missing or misspelled, or the wrong value for the FORMAT option might have been specified.
Action: Check that the WORKING-STORAGE SECTION header is in place and spelled correctly and that the right value for the FORMAT option is specified.
PRO-01008 Multiple element records not allowed in DECLARE section
Cause: A few COBOL compilers do not allow group items to be passed as parameters in a CALL statement. (Check the COBOL compiler user's guide.) If the compiler is one of these, group items within the DECLARE section can contain only one elementary item.
Action: Assign each host variable its own group item.
PRO-01009 For hostlan = COB74, a SQL statement must be followed by ELSE or "."
Cause: In a Pro*COBOL program, an EXEC SQL statement is followed by another statement in the same sentence. An EXEC SQL statement must be the last statement in a COBOL-74 sentence and so must be terminated by the keyword ELSE or a period.
Action: Change the program logic, making the EXEC SQL statement the last statement in the sentence.
PRO-01010 Invalid use of NULL character in character literal
Cause: A null character (binary zero) was found in a string literal. This is not allowed by Pro*COBOL.
Action: Remove the null character from the string literal.
PRO-01011 USAGE IS BINARY clause must be terminated by "." on same line
Cause: The period terminating the USAGE IS BINARY clause must be on the same line as the USAGE clause. This message only occurs on systems that support the COMP5=YES command line option of Pro*COBOL, where COMP-5 is substituted for BINARY.
Action: Check that the period terminating the USAGE IS BINARY clause is on the same line as the USAGE clause.
PRO-01012 DATA DIVISION not found
Cause: The Pro*COBOL precompiler did not find a DATA DIVISION in the input source file. Pro*COBOL applications are required to have a DATA DIVISION.
Action: Add a DATA DIVISION to the input source file.
PRO-01013 Invalid use of PIC N array variable "string" at line number in file string
Cause: A PIC N variable was declared using an OCCURS clause. Tables of PIC N variables are not supported by the Pro*COBOL precompiler.
Action: Declare the PIC N variable without an OCCURS clause or, if the PIC N variable is not used in any SQL statements, declare it outside the DECLARE section.
PRO-01014 "VARYING" not supported with PIC N PICTURE clause
Cause: The keyword VARYING was used in a PIC N variable declaration.
Action: Remove the keyword VARYING from the variable declaration. If you want to declare a PIC N VARCHAR variable, specify the precompiler option VARCHAR=YES and declare the variable as an implicit VARCHAR group item as illustrated by the following example:
EXEC SQL BEGIN DECLARE SECTION END-EXEC. ... 01 ENAME. 05 ENAME-LEN PIC S9(4) COMP. 05 ENAME-ARR PIC N(20). ... EXEC SQL END DECLARE SECTION END-EXEC.
PRO-01015 Cannot equivalence PIC N variable string
Cause: A PIC N variable or an implicit VARCHAR group item (with a PIC N variable as an elementary item) was used in an EXEC SQL VAR statement. This is not allowed.
Action: Do not use the PIC N variable in an EXEC SQL VAR statement. If you want an equivalence to an Oracle type using an EXEC SQL VAR statement, use a PIC X variable, instead of a PIC N variable.
PRO-01016 "N" character literals not supported in embedded PL/SQL
Cause: An "N" character literal was used within a PL/SQL block
Action: Remove the "N" character literal from the PL/SQL block.
PRO-01017 The SQLCA and a SQLCODE variable cannot both be used
Cause: The SQLCA has been included and a SQLCODE variable has been declared. This is not allowed as references to the SQLCODE variable are ambiguous and will result in COBOL compiler errors.
Action: Use either the SQLCA or the SQLCODE variable. Remove either the include of the SQLCA or the SQLCODE variable declaration.
PRO-01018 Conversion buffer size can only be specified for character types
Cause: A CONVBUFSZ clause has been used in an EXEC SQL VAR statement where the variable is not of a character datatype.
Action: Remove the CONVBUFSZ clause from the EXEC SQL VAR statement.
PRO-01019 Invalid conversion buffer size
Cause: The size specified in a CONVBUFSZ clause must be an integer in the range 1 to 32765. Either the size given is not an integer or is outside the required range.
Action: Specify an integer in the range 1 to 32765.
PRO-01100 You are not authorized to run Pro*FORTRAN
Cause: The authorization or license to run the Pro*FORTRAN Precompiler has expired.
Action: Call Oracle Customer Support for assistance.
PRO-01101 Your Pro*FORTRAN authorization is about to expire
Cause: The authorization or license to run the Pro*FORTRAN Precompiler is about to expire.
Action: Call Oracle Customer Support for assistance.
PRO-01102 Invalid label at line number in file string
Cause: The Pro*FORTRAN Precompiler found an invalid FORTRAN statement label in columns 1 through 6.
Action: Correct or remove the statement label.
PRO-01200 You are not authorized to run Pro*C
Cause: The authorization or license to run the Pro*C Precompiler has expired.
Action: Call Oracle Customer Support for assistance.
PRO-01201 Your Pro*C authorization is about to expire
Cause: The authorization or license to run the Pro*C Precompiler is about to expire.
Action: Call Oracle Customer Support for assistance.
PRO-01202 Identifier "string" truncated to 31 characters
Cause: A host identifier (the name of a host variable, for example) was truncated to the maximum length (31 characters) allowed by the precompiler. This is an informational message.
Action: No action required.
PRO-01300 You are not authorized to run Pro*PL/I
Cause: The authorization or license to run the Pro*PL/I Precompiler has expired.
Action: Call Oracle Customer Support for assistance.
PRO-01301 Your Pro*PL/I authorization is about to expire
Cause: The authorization or license to run the Pro*PL/I Precompiler is about to expire.
Action: Call Oracle Customer Support for assistance.
PRO-01400 You are not authorized to run Pro*Pascal
Cause: The authorization or license to run the Pro*Pascal Precompiler has expired.
Action: Call Oracle Customer Support for assistance.
PRO-01401 Your Pro*Pascal authorization is about to expire
Cause: The authorization or license to run the Pro*Pascal Precompiler is about to expire.
Action: Call Oracle Customer Support for assistance.
PRO-01500 You are not authorized to run Pro*Ada
Cause: The authorization or license to run the Pro*Ada Precompiler has expired.
Action: Call Oracle Customer Support for assistance.
PRO-01501 Your Pro*Ada authorization is about to expire
Cause: The authorization or license to run the Pro*Ada Precompiler is about to expire.
Action: Call Oracle Customer Support for assistance.
PRO-01510 No Package, Procedure or Function statement seen in string
Cause: Every Ada source file must have a package, procedure, or function statement. The precompiler did not find one.
Action: Add the appropriate statement(s) to the source file and rerun Pro*Ada.
PRO-01511 Identifier on line number in file string too long for code generated in file string
Cause: An identifier used in the host program is of a length that causes precompiler-generated code to exceed the length limitation on source lines.
Action: Use a shorter identifier or use the ORECLEN option to increase the allowed line length.
PRO-01512 Invalid EXEC SQL INCLUDE of file string found at line number in file string
Cause: The EXEC SQL INCLUDE statement is not allowed in Pro*Ada.
Action: Embed required source text directly in the Pro*Ada file. Use the "with" context clause to include required packages.
PRO-01513 FIPS warning: Unsupported datatype in line number of file string
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, a host variable was declared with a non-ANSI/ISO standard type.
Action: No action required. However, for ANSI/ISO compliance, use only ANSI/ISO standard types.
PRO-01515 FIPS warning: Undeclared host variable "string" at line number in file string
Cause: An Oracle extension to the ANSI/ISO SQL standard was used. Specifically, a host variable was declared outside of a DECLARE section.
Action: No action required. However, for ANSI/ISO compliance, declare the host variable within a DECLARE section.
